What do we need to check for oscillating knife | Industry news

What do we need to check for oscillating knife

Check now

When we bought a oscillating knife , which situation was most worried about? The machine must be broken and needs repair. Generally speaking, the machine may have some minor faults due to long-term use, not cleaned up in time, and no maintenance. We only need to check and maintain it when the fault does not occur to avoid the problem. If there is a problem that we cannot solve, we must contact professional after-sales personnel to help solve the problem.

Today, ACCTEK will introduce to you what inspections we need to do on machines in our daily lives. Hope to help you, if you have any questions, please feel free to contact us.

For hoisting or moving operations, qualified professional personnel and professional hoisting, moving, or moving equipment or tools are required. Strict adherence to safe operating precautions must be followed before operation. Otherwise, it may cause injury or death to people or damage the machine

Electrical Safety

1.Use a power supply with the same rated voltage and frequency.

2.When the grid voltage exceeds ± 20% of the specified voltage, the equipment should not be continued to be used.

3.Before use, confirm whether the insulation of various wires and cables is damaged to avoid causing leakage and electric shock. Regular maintenance and inspection

1.Power on and off operations should be performed by professionally trained operators.

2.The internal circuit remains in a high-voltage charging state for a short time after the power is turned off. Turn off the power before checking and wait 15 minutes to confirm that the charging lamp of each electrical appliance is off.

Daily inspection:

3.Do not use gasoline, thinner, alcohol, acidic and alkaline detergents, as the case may become discolored or damaged.Daily inspection:

1.Check the temperature, humidity, dust, foreign matter, etc.

2.Whether there is abnormal vibration and noise

3. Is the power supply voltage normal?

4.Is there a smell?

5.Is the air vent blocked?

6.Cleaning status of the cutting machine, cutters and electronic appliances in the case

7. Whether the electrical and electronic wiring is damaged

8.Whether the machine's feet are firmly fixed, and whether the machine has a large vibration Periodic inspection :

1.Is there any looseness in the fastening part.

2.Whether the wiring is good

3.Whether the distribution box is overheating.

4. The guide rails and racks need to be lubricated (grease) once a week, and clean up the expensive fuel.

5..The knife rod has an oil filling port, and regularly add an appropriate amount of oil to the oil filling port.

6.The air intake of the fan needs to be cleaned regularly

7. Silent compressed air pump requires regular cleaning of the water in the compression tank

8.The felt platform should be checked for foreign matter before use every day to avoid damaging the blade.

9. The machine casing cannot be wiped with corrosive wipes, and the machine must be regularly dusted

Warnings: When the machine is finished, when the personnel leave, be sure to turn off the main power of the machine.

ACCTEK is a company specializing in the production of engraving machines, laser machines, vibrating knives and other machinery. Its reputation has been excellent for many years. If you need a machine, it will be your best choice. If you want to know more, welcome to the 

ACCTEK is a company specializing in the production of engraving machines, laser machines, vibrating knives and other machinery. Its reputation has been excellent for many years. If you need a machine, it will be your best choice. If you want to know more, welcome to the official website

 

 

Additional reading:
A Beginner's Guide to Hydraulic Hammers for Excavator ...
Straw Briquetting Machine vs. Traditional Methods

SIEME Product Page

 

 

 

 

 

When it comes to choosing the right type of cutter for your CNC project, the material dictates every time. While a cutter may work well with one type of material, it might not always be the best choice for others. In fact, there are cutters specifically designed for certain types of materials, designed to last longer and perform more effectively than general-purpose cutters.

TANGENTIAL KNIVES

Tangential Knife comes with a selection of easily interchangeable blade cartridges that allows ultimate versatility for using creasing wheels and 45-degree blades, as well as the more standard vertical blades. Full directional control of the blade allows straight edges, sharp corners, and all radii to be cut cleanly and accurately. Watch a video of a tangential knife cutting foam board.

&#;

Tangential Knife Cartridge for 45° Blades

This tangential knife cartridge is specially designed to hold knife blades at a 45° angle and can be used to create &#;V&#; cuts in materials such as Foam Board, Xanita, Reboard, and others.

Tangential Knife Cartridge for Saber Blade

The saber blade is a robust and multi-purpose tool ideal for cutting hard materials such as laminates, Styrene, Sintra, and similar up to about 1/16&#; thick.

Tangential Knife Cartridge for Box Cutter Blades

The box cutter cartridge holds straight, multi-purpose blades suitable for cutting a wide variety of materials from thin polyester film to thick card and Foam Board.

Tangential Knife Cartridge for Pizza Wheel

This cartridge allows the use of a rotary &#;Pizza Wheel&#; blade which is ideal for cutting tough or abrasive materials such as a gasket.

VIEW our selection of Tangential Knives.

 

 

 

 

 

 

 

 

 

 

 

OSCILLATING KNIVES     

The Oscillating Knife slices through softer materials cleanly without fraying the edges. Softer materials all present challenges for traditional router or knife tools, but the &#;sawing action&#; of the oscillating knife allows it to make cuts without compromising on quality. The thicker the material, the better suited an oscillating knife will be to cut it. Standard blades are available from ¼&#; (6mm) to 4&#; (100mm) as well as custom lengths, making them ideal for various foam applications and thicknesses. The Oscillating knife in conjunction with the AXYZ AVS Vision System delivers incredible value for any print to cut operation. Watch a video of an Oscillating Knife cutting foam.    

VIEW our selection of Oscillating knives 

 

                                                      

 

 

 

 

 

Are you interested in learning more about oscillating knife cutting machine? Contact us today to secure an expert consultation!