Login

Your Name:(required)

Your Password:(required)

Join Us

Your Name:(required)

Your Email:(required)

Your Message :

Silent Demolition Agent - Crack Rock Demolition

Author: Morgan

Sep. 30, 2024

13 0 0

Tags: Chemicals

Silent Demolition Agent - Crack Rock Demolition

  1. After drilling minimize water and residue left behind in the holes before using product.

    For more information, please visit our website.

  2. Within 10 minutes of mixing pour the product into the holes filling within to 1&#; from the top.

  3. Continuously pour the mixture into the holes one at a time to ensure no air gaps are trapped within.

  4. For horizontal and slant holes, insert a slightly smaller plastic pipe into the hole, and then fill the expansive slurry into the pipe slowly, withdrawing the pipe from the hole simultaneously then cap it.

  5. Do not leave any surplus mixture in the bucket use all remaining expansive mortar slurry.

  6. After the holes have been filled keep out of sunlight, cover with a tarp and do NOT look into the holes.

  7. For best results allow product to set for 24 hrs (product will continue to expand up to 48 hrs).

How To Use – Non Explosive Demolition Agent, Rock ...

&#; Packaging

HSCA agent is packed in 5kgs per bag, 4 bags per canrton. Customized packing is available as well.

Sanqiang Building Material Product Page

Additional reading:
How to Choose pigment powder wholesale?

&#; Storage

Up to 1 year in accordance with manufacturer&#;s instructions for use. Store in cool, dry conditions as for cement. If the outter bag is open, push the air out of the bag and seal it with tape. Use it as soon as possible. Keep out of reach of children.

&#; Expiration timing

our minimum product effective time is 12month from the date of delivery, with right storage condition and intact packing, it can last for 3 years.

&#; Caution

&#; When mixing and filling holes always wear rubber gloves, safety glasses and helmet.

&#; Do not use for other purposes besides the cracking of rocks or concrete.

&#; Rinse with water when any portion of the skin comes into contact with high range soundless cracking agent

&#; Do not look directly into holes filled with high range soundless cracking agent for at least 8 hours after pouring.

&#; Health and Safety

For full information on Health and Safety matters regarding this product the relevant Health and Safety Data Sheet should be consulted.

As with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin and foodstuffs, (which may also be tainted with vapour until the product is fully cured and dried). Treat splashes to eyes and skin immediately. If accidentally ingested, seek medical attention. Keep away from children and animals.

If you are looking for more details, kindly visit High Range Soundless Cracking Agent.

Comments

0

0/2000