Pitless Adapters: What They Are & What They Do? - Hayes Blog

Enter pitless adapters; a simple, elegant solution that makes the abovementioned issues obsolete. These adapters eliminate the need for a well pit, hence the term &#;pitless.&#;

Link to Yulin Machinery

How Pitless Adapters Work

Pitless adapters provide a water-tight connection between the drop pipe from the submersible pump inside the well and the water line running to the service location. The device not only prevents water from freezing but also permits easy maintenance of the well components without the need to dig around the well. The adapter comes in two pieces that can easily slide together to create a water-tight seal.

A fundamental difference between the pitless adapter and the conventional wellhead is that the drop pipe exits from the side of the casing rather than from the top. Such a change is possible because the connection of the two pipes is at a 90-degree angle. Also, the adapter is kept below the frost line to prevent the water from freezing. 

The Benefits of Pitless Adapters

The 90-degree bend in the water flow allows the wellhead to be extended above the ground. As a result, the chances of surface water contamination are reduced considerably. Extending the wellhead above ground also allows easy access for well maintenance.

The design of the pitless adapter also facilitates easy maintenance and component removal. For example, if you need to remove the internal assembly of the well, you can simply screw a tool to the threaded male component of the pitless adapter and pull the assembly out.

In addition, performing other maintenance tasks, such as chlorination or video well inspections, is easier than working on an underground wellhead.

Types of Pitless Adapters

Two popular types of pitless adapters are differentiated based on their operation and connection mechanism.

For more casing spool manufacturerinformation, please contact us. We will provide professional answers.

Slide Pitless Adapter

Slide pitless adapters are more common in residential and commercial applications. You can install these adapters by making a hole through the well casing. Slide pitless adapters can connect with pipes of up to 2" diameter. The adapter's male and female components consist of gaskets and single O-rings. These sealings create a water-tight joint inside and outside the well casing to prevent leakage. 

Apart from their typical applications in submersible pumps, pitless adapters are sometimes used to install the riser pipe and foot valve in shallow well jet pump systems.

Spool Pitless Adapter

A spool pitless adapter comprises two key components: the spool and the discharge housing. The spool adapter is between the upper barrel and the well casing. Typically, this discharge housing or the upper barrel is 2&#; larger than the well casing. The well is then sealed off with a well cap. 

While a slide adapter creates a compression seal by sliding the mating parts into place, a spool adapter creates a compression seal between the circumference of the spool and seats in the discharge housing using two O-rings. 

You can simply pull out the submersible pump for maintenance or emergency repairs by lifting the spool and pipe columns using a lift-out assembly.

Pitless adapters have eliminated the need to have dangerous and unsanitary well pits. In addition, these adapters provide a quick and easy connection below the frost line and make well-maintenance more convenient. Slide and spool pitless are two common pitless adapters essential in moving water from the source to the desired service location. Although both these adapters have a common purpose, their applications differ mainly due to their design differences.

If you&#;re looking for a pitless adapter or any custom pump parts, Hayes Pump can help. Our partnership with ProCast delivers custom-manufactured parts that meet your requirements and keep your pumps running optimally.

Looking For Pump Parts?

Want more information on frac gate valve design with ball screw? Feel free to contact us.