Product Description

Goto KSQ Technology to know more.

Halco DTH

Halco DTH Hammers Selection Guide for High Frequency overburden drilling

 

The Mach 60 is a general purpose hammer suitable for all rock conditions at a wide range of air pressures. The hammer is fitted with a reversible cylinder to prolong service life.
 

Mach 60 is versatile and reliable, requiring only a few simple tools for servicing and maintenance. Mach 60 is very economical to operate due to its relatively low air consumption and has a unique Mach 60 shank for full bit support. This hammer is most suited for use with the Sim-Cas Overburden system because of the high frequency of the piston/cycle.
 

Suitable for operation at air pressures of 100 - 435 psi (7 - 30 bar).

Drilling diameters of 152 mm - 216 mm (6 - 9 5/8").

Available Shanks: Halco Mach 60.

 

 

MACH RANGE This is a proven hammer that has been around for over 30 years and is designed for all kinds of drilling conditions but excels in overburden drilling due to the high frequency with less blow energy for drilling through unstable ground conditions. This hammer can drill smaller diameters than the standard range. This range of hammer is ideal for civil engineering.
 

DOMINATOR RANGE The Dominator is a higher performance hammer than the Mach Range ideally suitable for medium to higher air pressures in blast-hole applications. This design is simple with fewer components, which makes servicing and on-site maintenance easy. With a range of heavy duty models on offer this extends the life of the hammer considerably.

SUPER DOMINATOR RANGE The Super Dominator is the latest hammer in the range, specially designed for working at extreme high working pressures up to 500 psi with high penetration rates ideal for blast-hole and waterwell applications. The Super Dominator Range has a simple design with no make-up required. This hammer has an external non-return-valve for easy inspection and service and is available with a 12 spline drive system to reduce shank breakage.
 

GW RANGE The new GW series of DTH hammers from Halco Rock Tools offer breakthrough performance in challenging Geothermal and Waterwell applications. The robust non ported piston design dramatically improves both the piston and internal component life when drilling under a column of water. A built in choke facility allows the driller to adjust the volume of air through the hammer to optimise cuttings evacuation. GW500 and GW600 hammers are fitted with a reversible cylinder to maximise operating life and are suitable for operation at air pressures up to 30 bar (435 psi).

 

Halco DTH Hammer HALCO DOWN THE HOLE HAMMERS SELECTION GUIDE PART NUMBER HALCO HAMMER SHANK 1" RANGE DOMINATOR 10 HALCO DOMINATOR 1 (Discontinued) DOMINATOR 100 HALCO DOMINATOR 100 2" RANGE DOMINATOR 20 HALCO - BOX DIN 50MM (Discontinued) MACH 20 HALCO - BOX DIN 50MM (Discontinued) MACH 20 HALCO - BOX DIN 40MM 3" RANGE MACH 303 HALCO MACH 303 DOMINATOR 350 IR DHD 3.5 DOMINATOR 375 MD 3.5 DOMINATOR 375 IR DHD 3.5 4" RANGE MACH 44 HALCO MACH 44 SUPER DOMINATOR 400 HALCO MACH 44 SUPER DOMINATOR 400 A34-15 SUPER DOMINATOR 400 IR DHD 340A SUPER DOMINATOR 450 HALCO SDOM 450 SUPER DOMINATOR 450 IR DHD 340 5" RANGE MACH 50 HALCO MACH 50 DOMINATOR 500 HALCO MACH 50 DOMINATOR 500 A43-15 SUPER DOMINATOR 500 IR DHD 350R SUPER DOMINATOR 550HD IR DHD 350R SUPER DOMINATOR 550 HD QL 50 IR QL 50 GW 500 HD IR DHD 350 GW 500 HD IR DHD 350 6" RANGE MACH 60 HALCO MACH 60 DOMINATOR 600 HALCO MACH 60 DOMINATOR 600 IR DHD 360 DOMINATOR 600 A53-25 SUPER DOMINATOR 600 IR DHD 360 SUPER DOMINATOR 650 IR DHD 360 SUPER DOMINATOR 650 A53-15 SUPER DOMINATOR 650 HD QL 60 IR QL 60 GW 600 IR QL 60 GW 600 IR QL 60 7" RANGE DOMINATOR 750 A63-15 / SD8 8" RANGE DOMINATOR 800 HALCO MACH 80 DOMINATOR 800 A63-15 / SD8 DOMINATOR 800 IR DHD 380 DOMINATOR 800 LE IR QL 80 DOMINATOR 850 IR QL 80 DOMINATOR 880 A63-15 / SD8 DOMINATOR 880 IR DHD 380 DOMINATOR 880 DW IR DHD 380 10" RANGE DOMINATOR SD10 12" RANGE SUPER DOMINATOR IR QL 120 MACH 120 A100-15 / SD12 MACH 122 A100-15 / SD12 MACH 132 IR DHD 112 MACH 142 IR DHD 112S

 

ROSCHEN DTH Hammers Specifications Hammer Size Bit Shank ROSCHEN Code Connection Thread Suitable bit Working pressure Air consumption 2" BR2 ROS 11   ROS 22 RD50 box &#;70-&#;90mm 0.7-1.75Mpa 0.7Mpa 4.5m3/min 1.0Mpa 4m3/min 1.4Mpa 5m3/min 3" DHD3.5 ROS 32 API 2 3/8" Reg &#;90-&#;110mm 1.0-1.5Mpa 1.0Mpa 4.5m3/min COP32/COP34 M30 1.5Mpa 9m3/min 4" DHD340 ROS 34 API 2 3/8" Reg &#;110-&#;135mm 1.0-2.5Mpa 1.0Mpa 6m3/min COP44 QL40 SD4 1.8Mpa 10m3/min M40 2.4Mpa 15m3/min 5" DHD350 ROS 52   ROS 54 API 2 3/8"Reg/API 3 1/2" Reg &#;135-&#;155mm 1.0-2.5Mpa 1.0Mpa 9m3/min COP54 QL50 SD5 1.8Mpa 15m3/min M50 2.4Mpa 23m3/min 6" DHD360 ROS 62   ROS 64 API 3 1/2" Reg &#;155-&#;190mm 1.0-2.5Mpa 1.0Mpa 10m3/min COP64 QL60 SD6 1.8Mpa 20m3/min M60 2.4Mpa 28.5m3/min 8" DHD380 ROS 82   ROS 84 API 4 1/2" Reg &#;195-&#;254mm 1.0-2.5Mpa 1.0Mpa 15m3/min COP84 QL80 1.8Mpa 26m3/min SD8 2.4Mpa 34m3/min M80/M85 10" SD10 ROS 100 API 6 5/8" Reg &#;254-&#;311mm 1.0-2.5Mpa 1.0Mpa 22m3/min Numa100 1.8Mpa 40m3/min ROS 100 2.4Mpa 55m3/min 12" DHD ROS 120 API 6 5/8" Reg &#;305-&#;445mm 1.0-2.5Mpa 1.0Mpa 30m3/min SD12 1.8Mpa 56m3/min Numa120 2.4Mpa 78m3/min Notes: Any special size of DTH bits will be available by requests. Metzke, Remet thread is available!

 

AVAILABLE SHANKS:
 

Dominator 100
DHD 3.5
Mach 50
Mach 60
Mach 80
SD 10
QL 120
Mach 20
SD 450
SD 5
SD 6
SD 8
DHD 112

Mach 303
Mach 44
DHD 350R
DHD 360
DHD 380
DHD 112S

MD 3.5
DHD 340A
QL 50
QL 60
QL 80
SD 12

 

 

DTH Button Bits Mission 40 140mm Down The Hole In Australia Mining For Well Drilling

DTH Button Bits
Diameter: 57mm-660mm
Application: Well drilling, Ore ming, Coal mining
Shank of Bit: DHD,COP,Mission,SD,QL,TD,BR
Basic Bit Designs: Convex, Flat front, Speed Bit, Concave, Rocket Bit

DTH BUTTON BITS
 

HIGH PRESSURE DTH BUTTON BITS
Shank: DHD3.5, DHD340A, DHD350R, DHD360, DHD380, QL40, QL50, QL80, COP44, COP54, COP64, COP84, SD4, SD5, SD6, SD8, Mission 40, Mission50, Mission60, Mission80, Mach 33, Mach 44, BR2, BR3, BR4, Mach 50, SD10, SD12, DHD112, Numa 120, Numa 125.
Diameter: 76mm-550mm.

DIFFERENT FACES STYLES:
 

Flat face: This is an universal design, especially for hard and abrasive rock formation. So typically, flat face with hemi-spherical buttons design is the most popular choice.
 

Convex face: A classic design for soft to medium hard rock formation which is not so abrasive. This design have very excellent penetration rate but poor in hole deviation if rocks are hard.
 

Concave face: Medium hard to hard rock formations which is less abrasive and fractured. Especially for deep hole drilling, excellent control over hole deviation.
 

DGR face: A special design for hard or very hard rock conditions, double gauge row buttons provide very excellent ware-resistance and very longer life time. It is usually used for some bigger diameter DTH bits. Besides, we are manufacturing the DTH bits with various shanks so they can be compatible with different DTH hammers

 

RECOMMENDED DTH BITS AND DTH DRILL PIPES:
 

Bit Size: 3.5"/3", DTH Hammer Bits Shank Types: COP34, DHD3.5, MISSION30 BR3, Recommended Bits: 90mm-105mm
Bit Size: 4" DTH Hammer Bits, Shank Types: DHD340, QL40, MISSION40, SD4, Recommended Bits: 110mm-130mm.
Bit Size: 5" DTH Hammer Bits, Shank Types: DHD350, QL50, MISSION50, SD5, Recommended Bits: 134mm-152mm.
Bit Size: 6" DTH Hammer Bits, Shank Types: DHD360, QL60, MISSION60, SD6, Recommended Bits: 152mm-203mm.
Bit Size: 8" DTH Hammer Bits, Shank Types: DHD380, QL80 MISSION80, SD8, Recommended Bits: 203mm-305mm.
Bit Size: 12" DTH Hammer Bits, Shank Types: DHD112, SD12, QL120, Customer Tailor-made.

DTH Drill Pipes:
 

Diameter: 60mm, 76mm, 89mm, 102mm, 114mm, 140mm, 146mm, 168mm,
Thread Sizes: 2 3/8" API, 2 7/8" API, 3 1/2" API, 4 1/2" API.
Wall Thickness: 5.5mm, 6.5mm, 8.5mm, 10mm, 11mm, 19mm, etc.
Length: mm- mm
P.S: All DTH drill pipes are friction welded.

 

 

FAQ
 

The information about dth drill bit you may like to know before order:

1. Methods of Payment:
T/T (Telegraphic Transfer) or Western Union or L/C at sight

2. Handling time for an order
Based on order quantity, normally it takes 20 days for production.
in 3 working days after receiving the advance payment

3. Shipping way
Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air
Bulk order: we suggest by air or by sea.

4. Quality Control
We have our own experienced QC.
There will be strict inspection and testing for every order before shipping out.

5. After Services:
a. Our sales team will response for your question within 24 hours (Holidays Excluded)
b. Technical Support will be available in any time

6. Quality & Service:
A. There will be strict inspection and testing for every order before shipping out.
B. Our sales team and Technical Support will response for your question within 24 hours through skype: ROSCHEN.TOOL and /Wechat: +86-
C. Free replacement will provide once the failure confirmed caused or our product quality.

 

For more information, please contact:

 

ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED

Skype: ROSCHEN.TOOL , ROSCHEN_GROUP

WeChat: +86-137 ; +86-135

: +86-137 ; +86-135

: ;
 

Website: http://www.roschen.com ; http://www.roschen.net

http://www.roschen.cn ; http://www.roschendrill.com

http://www.roschenmining.com ; http://www.roschendrilling.com

http://www.roschengroup.com

Maxdrill 76mm DTH drill bit for COP20 hammer 

Are you interested in learning more about 76mm DTH Hammer Drill Bits? Contact us today to secure an expert consultation!

Product Description

Diameter

Weight

Part No.

Face type

76mm

5.0kgs

76COP20CV

Flat/Concave/convex

Company Profile

Maxdrill Rock Tools Company is a professional drilling tools manufacturer and supplier based in China. We provide a wide variety of drilling tools and anchor tools, such as top hammer drilling tools, down the hole drilling tools, rock anchors, taphole and quarry drilling tools, and more. We make our products with a high quality alloy, so they are strong and reliable. This is why they are widely used in slope anchor, tunnel excavation, mine exploration, and other similar projects.

Quality drilling tools is of great importance in rock mining. Since our establishment in , we have focused on developing and producing high quality drilling tools and anchor tools.

 

Customer's Feedback

Certifications

 

FAQ

FAQ

The information you may like to know before order:

1. Methods of Payment:

  T/T (Telegraphic Transfer) or Western Union or L/C at sight

2. Handling time for an order

  Based on order quantity, normally it takes 25 days for production.

  Only 2 or 3 days if we have stock on your request size.

3. Shipping way

  Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air

  Bulk order: we suggest by air or by sea.

4. Quality Control

  We have our own experienced QC.

  There will be strict inspection and testing for every order before shipping out.

5. After Services:

  a. Our sales team will response for your question within 24 hours (Holidays Excluded)

  b. Technical Support will be available in any time

  c. Free replacement will provide once the failure confirmed caused by our product quality

Contact Information
Contact Person:Ms Linda Chen
 
 

The company is the world’s best Rock Drilling Tools Manufacturers supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.