Five things to consider when choosing hi-vis

What do the different colours mean? And, what hi-vis should you be wearing?

For more information, please visit our website.

Hi-Vis is hardly the height of fashion. Although&#;it has probably been used in an obscure fashion line at some point.

You may be on a construction site, attending a football match or visiting a festival. Hi-Vis is an integral part of society and can be seen in varying formats and styles.

So, what do the different colours mean? And, what hi-vis should you be wearing?

The purpose of hi-vis is to make you stand out from your surroundings.

Whilst the most common colour of hi-vis is fluorescent yellow, it isn&#;t always the best choice.

Hi-vis uses reflective bands to make you more noticeable in low-level light and headlights.

When you&#;re more noticeable an accident is less likely to occur. The sooner a driver sees a person the more time they have to react.

Colourful Hi-Vis

These are the type of hi-vis vests that you may see at a festival or a concert. They can be used to denote a person&#;s role such as a steward or first aider.

Coloured hi-vis doesn&#;t make you to stand out from your surroundings enough to conform to standard EN. They aren&#;t appropriate for hazard prevention.

Some brands choose colourful hi-vis for their workforce, as the colours align with their uniform. Yet those who wear these garments aren&#;t involved in hazardous roles.

When looking at Blackrock&#;s hi-vis sleeveless vests there are six colours available.

Both the orange and yellow vests conform to standard EN Class 2. The green, navy, pink and red vests do not.

Orange hi-vis is used by rail workers.

Why?

Very often, rail work is done in green environments. Fluorescent orange is far more visible than yellow in this scenario. Orange won&#;t blend in.

Yellow is used more indoors as it is a brighter colour and can be seen better in low-level light.

Two-Tone Hi-Vis

A two-tone hi-vis uses two separate colours. A fluorescent colour and another colour (fluorescent or not).

If some fluorescent material is replaced with non-fluorescent material, the garment may be put into a different hi-vis category (see below).

The main purpose of two-tone hi-vis is to differentiate between staff roles or locations. For example, someone working in warehouses A and B would wear a different colour hi-vis.

That said some two-tone garments do have practical benefits. Darker panelling on the lower half of the garment can help to protect against dirt.

Within the Blackrock range, there is a good example of how hi-vis colouring can affect its class.

Four two-tone high vis waistcoats conform to at EN Class 2. The others, as they contain less fluorescent material, conform to EN Class 1.

In contrast, the hi-vis two-tone bomber and coat conform to EN Class 3 &#; the highest standard. This is due to the amount of fluorescent fabric that&#;s visible.

The Hi-Vis Class System

Not to be confused with the English class system.

Hi-vis is divided up into different classes depending on two things: the amount of fluorescent material and reflective tape on show.

You may have noticed that smaller sizes of hi-vis are unusually long.

This is done to increase the quantity of fluorescent fabric. And enable the garment to conform to the same standard as an extra-large in the same range.

There are three classes of hi-vis: Class 1, 2 & 3. The amount of fluorescent material and reflective tape determines what class the hi-vis falls into.

Hi-vis Class 1: Lowest Visibility Level

With competitive price and timely delivery, Wei Guang sincerely hope to be your supplier and partner.

Two-tone hi-vis vests and hi-vis trousers

Hi-vis Class 2: High Visibility Level

Sleeveless Hi-Vis vests

Hi-vis Class 3: Highest Visibility Level

Hi-Vis Coats & Bombers and long sleeve hi-vis vests & garments

There are two ways to achieve class 3 visibility:

• Wearing a garment that is Class 3
• Wearing jointly certified garments whose combined fluorescent material and reflective table enable it to achieve class 3

What Hi-Vis should I Wear?

The hi-vis you wear should be in line with the risks found in the risk assessment.

If you are working in a role that requires you to wear a hi-vis, then your employer must provide you with the appropriate clothing.

If you&#;re in charge of choosing hi-vis for yourself or your employees, consider this:

• Where is the hi-vis garment being worn?
• What is the lighting like?
• What is the risk of being hit by a moving vehicle?
• How much time does the driver need to react?
• Do you need to identify different job roles?

If there is a high risk you&#;ll be hit by a moving vehicle, class 3 hi-vis should be worn, providing the maximum amount of visibility. In this scenario, you may require extra hi-vis for full coverage on your legs.

If there is a medium risk you will be hit by a moving vehicle, at least class 2 hi-vis should be worn.

Class 1 hi-vis is usually reserved for roadside assistance personnel, volunteers, and delivery drivers where the risks are lower.

If you&#;re outdoors, in a wooded area, an orange garment is required. Yellow hi-vis will blend in with the surrounding environment.

Is the lighting in your workplace gloomy? If so, orange hi-vis won&#;t be as visible.

In short, when choosing hi-vis garments, ensure that the level of risk has been considered, as has the environment where the work is done.

Differentiating between the colours of hi-vis can help to see different job roles, but extra colours may reduce the garments class.

Hi-vis isn&#;t a fashion item. And yet it does have the same purpose &#; to make you stand out.

Get in contact with us so we can help you stand out.

Related Articles

• Your hi-vis could be putting you at risk

A very important component of Personal Protective Equipment is the safety vest or surveyors vest. Just about anywhere you go, you will see all types of workers wearing safety vests. These vests play an important role to ensure that workers are more visible, especially in traffic areas. There are several things to consider when purchasing safety vests.

These days, people are staying out longer during the days and evenings, such as those who enjoy riding bicycles, jogging or running. Safety vests are an ideal way for them to be seen, as well. Safety products for work for athletes because they are sleek and not bulky, and are intended to keep citizens safe, too, as well as those who wear them to work each day. Another good idea is to purchase some reflective strips for your children&#;s bikes, to help them be more visible to drivers.

Employers are required to provide a safe working environment for each employee while meeting the U.S. standards set by ANSI. In addition, is your company up to speed when it comes to safety equipment and clothing? Making changes to reduce hazard and injury can be easily accomplished by switching to a safer chemical, using proper protection, and quality gear.

Safety vests play an important role in keeping workers safe. Vests help keep your workers more visible especially in high traffic areas. Before buying new safety vests for your employees, make sure to look for these 5 things.

Breathable material. Choose a mesh or lightweight material to ensure versatility throughout the year.

Bright colors. Always stay in the neon color family when buying safety vests. Color plays an important role in the safety of traffic workers.

ANSI Standards. Our breakaway safety vest meets ANSI 107 Class 2. When in doubt, always purchase safety products that meet ANSI standards.

Reflectivity. Adding more visibility is never a bad idea when it comes to high traffic workers. Reflective vests will especially come in handy during the winter months when the days are shorter.

The easy closure is often overlooked, yet still important. Keep it fast and simple with easy and long lasting Velcro closers.

For more information, please visit Reflective Safety Clothing.