How to Select the Right Tubing for Your Project 

To select the right tubing for your project, you first have to know what type of tubing you need.  Low-pressure tubing, for drip irrigation, can be broken down into three categories: mainline tubing, micro-tubing, and dripline tubing. Before describing the use of each type of tubing, it is important to first understand the basic rules and limitations of each type. Not adhering to these rules can result in a poorly functioning drip irrigation system.

View Details

Regardless of the type of tubing selected for your project, there are two pieces of information that are critical when selecting tubing: run length and total flow rate. For example, what is the length your longest run of tubing needs to be?  How many gallons per hour will your system be requiring?  To choose the right tubing for your project, both factors need to be considered, but at this moment, let's look at each separately.

Maximum Run Length 

Maximum run length is the longest length for which a certain size of tubing can maintain equal pressure.  If the maximum run length is exceeded for a size of tubing, then the pressure supplied to each dripper or watering device will vary, and this can cause strange things to happen (e.g., water shooting out of drippers, no water coming out, etc.). Maximum run length varies for each size of tubing, so knowing how far you need to run tubing before ordering helps to make sure you order the right size for your project.

Maximum Gallons Per Hour (GPH)

When selecting the right tubing size for your project, maximum run length is important, but the maximum number of gallons per hour (GPH) that a size of tubing can supply needs to be considered as well.  Each size of tubing can only supply a certain number of gallons per hour before too much pressure loss begins to occur.  To find the gallons per hour that you need in your system, you simply add up the output of all the watering devices.  For example, if your system uses 40 .5-GPH drippers, 20 1-GPH drippers, and 2 adjustable drippers at 10 GPH, the total GPH used is:

• 40 x .5 GPH drippers = 20 GPH
• 20 x 1 GPH drippers = 20 GPH
• 2 x 10 GPH adjustable drippers = 20 GPH

Add the total for each dripper type (20 + 20 + 20) to give a grand total of 60 GPH

Maximum Run Length & Maximum Gallons Per Hour (GPH)

Once you know both of these factors, then it is easy to select the size tubing that best fits your project needs.  Take, for example, a project that has a maximum run length of 20 feet and a flow requirement of 60 GPH.  What tubing could be used?  Take a look at this chart. PLEASE NOTE this chart is in reference to your mainline:

Tubing SizeMaximum Run LengthMaximum GPH Supplied1/4"30 feet30 GPH1/2"200 feet200 GPH3/4"480 feet480 GPH1"960 feet960 GPH

You can see that the run length allows for all sizes of tubing to be used, but because the total GPH needed is 60, this eliminates ¼' tubing because 60 GPH is more than double what ¼' tubing can supply (30 GPH).  If ¼' tubing were used for this system, it would not function properly.

Note: If you think you may want to expand your system in the future, it is a good idea to start with one tubing size larger than your run length and gallons per hour require, in order to give you the flexibility to add to your system in the future.

Frequently Asked Questions About Tubing:

• What is Mainline Tubing?

Mainline tubing (a.k.a. supply line tubing) acts as the water supply for your system.  Mainline tubing starts at a water source and is then run as needed.  Selecting the right size mainline tubing is important.  To choose the right size mainline tubing, match your maximum run length and total gallons per hour needed with the chart above.  Once the mainline is laid out in your system, water devices can be inserted directly into the mainline tubing or adapters can be inserted to run micro tubing, drip tape, or dripline away from the mainline tubing to the plants to be watered.

• What is Micro Tubing?

Micro-tubing is commonly used to describe ¼' tubing.  It can be used as mainline tubing, but remember that it cannot be over 30 feet in length or supply more than 30 GPH. This works well for small patio areas, but beyond that micro-tubing is often used to take drippers or other watering devices from the mainline tubing to the plant to apply water directly to the root zone.  A hole punch is used to create a hole in the mainline tubing (½' or greater) where one end of a connector is inserted; the other is connected to a run of ¼' micro-tubing.  Even though the micro-tubing is not being used as mainline tubing, it still can't stretch more than 30 feet away from the mainline tubing.  Micro-tubing comes in either poly or vinyl rolls.  Below we'll briefly describe the pros and cons of each.

• The Differences Between Poly and Vinyl Tubing?

When buying drip irrigation tubing, the micro-tubing (1/8" or 1/4") is the only one that requires you to decide between poly or vinyl.  Vinyl tubing is softer than poly and thus is considered easier to work with.  Poly tubing may be a bit stiffer at first, but it does have some benefits.  It withstands UV rays very well and does not expand, as much, when heated.  Many of our customers in the hotter southern states (Texas, Arizona, New Mexico, etc.) have reported that their vinyl tubing began to pop off of the fittings after about 2'3 years of use.  Due to the additives to make vinyl tubing softer, it softens much more than poly in the heat of the sun.  This can cause the tubing to slip off the fittings after prolonged exposure to the sun. Poly micro-tubing is much more resistant to expansion and therefore less likely to come off the fittings or drippers.

• How to Add to Existing Tubing?

Unfortunately, in the drip irrigation industry, there are no industry standards regarding tubing. Drip irrigation tubing is considered nominally sized. What this means is that tubing products manufactured by different manufacturers will not necessarily be the same size, even if they both say, for example, half an inch (½').  When adding to an existing system, it's important to know the manufacturer of your tubing as well as the inside and outside diameter of the tubing you want to add to.  To find out more about compatibility, check out our compatibility guide.

• What is Dripline Tubing?

A dripline is a tubing that has emitters embedded directly into the tubing at preset spacings and dripper flow rates.  Dripline tubing can save a lot of time, as there is no need to insert drippers.  You simply lay out your dripline and connect it to your system.  Dripline is available in ½' and ¼' tubing sizes with a limited number of standardized emitter spacings and emitter flow rates.

Note: The maximum run lengths for the dripline still apply (¼' 30 feet & ½' 200 feet). Below is a chart of available driplines and common uses for each

Tubing SizeMaximum Run LengthAvailable Spacing & Emitter CombinationsCommon Applications1/4" Dripline30 feet.5 GPH emitters every 6"
.5 GPH emitters every 9"
.5 GPH emitters every 12"
Note: 6" spacing is recommended if the soil is sandy or plants are tightly planted next to one another

• Tree Rings
• Densely Planted Landscapes
• Small Gardens
• Window Boxes
• Raised Beds

1/2" Dripline200 feet.5 GPH emitters every 9"
.5 GPH emitters every 18"
.5 GPH emitters every 24"
1.0 GPH Emitters every 12"
1.0 GPH Emitters every 18"

• Long runs of crops in straight rows
• Watering Blueberries
• Watering Grapes in Vineyards

We appreciate your feedback and welcome suggestions. We encourage you to contact us if you are not finding the information you are looking for in this article. 

With competitive price and timely delivery, Lfsprrain sincerely hope to be your supplier and partner.

Additional reading:
Advancing Lithium Cylindrical Cells Custom Solutions for 2025

Drip Irrigation Buying Guide

Last updated September 7,

While standard sprinklers and automated in-ground irrigation systems can both provide ample amounts of water to your yard, they are not as efficient and effective when it comes to watering gardens, plants and other hard-to-reach areas. Drip irrigation, with its flexible features and low-pressure emission, deposits water only where it's needed, preventing it from being wasted and saving you money in the process.

Rather than casting a wide spray or steady stream of water over a large area, drip irrigation dribbles out tiny quantities of water to provide steady soaking in specific places.

SHOP
DRIP IRRIGATION NOW

Buying GuideOutdoor Living IdeasLawn & Landscaping Ideas & ProjectsVideoWater and IrrigationGardeningOutdoor

Table of Contents

1. Types and Applications

2. Components

3. Kits & Features

Types and Applications

Drip irrigation types:

• Drip: Delivers water one drop at a time to keep roots moist. Recommended for container plants, flower gardens and vegetable gardens.
• Emitter line and drip tape: Provides saturation coverage along the entire line and has equally spaced emitters built in. Recommended for vegetable gardens, flower gardens and raised garden beds.
• In-line drip: Placed between sections of tubing to allow water to drip out as it flows through. Recommended for hedges, shrubs and landscaping.
• Punch-in: Inserted through a hole in the pipe and feature a ridge on the inlet barb that prevents them from popping out; allows for customized flow rates and water pressure. Recommended for soils ranging from clay to sandy container plants on decks, gardens and landscaping.

Installing drip irrigation is a snap for any motivated do-it-yourselfer. Consider which areas of your yard need it the most and take measurements to determine how much pipe or hose will be required.

Drip irrigation can be buried underground or laid on the ground and covered with mulch.

• Use drip irrigation to water oddly shaped sections of your lawn, hanging baskets or vines growing on a trellis that cannot be reached by normal sprinklers or manual watering cans.
• Laying strips along your landscaping will provide just the right amount of water for plants and shrubs without wasting any on a nearby sidewalk.
• Weaving drip irrigation through your garden or burying it just underneath the soil will ensure that crops get the proper amount of hydration.
• As with traditional automatic irrigation systems, you may need to winterize your drip system if you live in a cold climate that experiences freezing temperatures during the fall and winter.

Components

There are a number of components you need for your drip irrigation system. Preassembled kits make it easy to find all of the components you need for each specific watering purpose. Water can be dispersed through emitters, micro-sprinkler heads, foggers or sprayers.

• Pipe, also called tubing or hose, is the line through which water runs. It can be connected to any outside faucet.
• Add a filter to ensure that minerals and other debris are removed from the water before it reaches your plants, particularly if you're drawing from a nearby stream or river.
• If you don't already have one in place, install a backflow preventer, or vacuum breaker, to stop contaminated water from flowing back into your water supply.
• A Y-shaped connector can connect drip irrigation and a hose to a faucet simultaneously.
• Supply and header lines are usually 1/2-inch in diameter while lateral lines are 1/4-inch.
• A pressure regulator maintains steady water pressure for better operation.
• Elbowand T-shaped connectors provide multiple installation options.
• Foggers create a fine mist that is ideal for watering hanging plants and flowers.
• Micro-sprinkler heads function like regular sprinklers at lower pressure and volume.

Tip: If you're setting up a particularly long run or need to go up and down hills, look for pressure-compensating emitters, which maintain a steady flow rate despite changes in water pressure along the line.

Kits & Features

Drip irrigation kits are available for specialized needs. Because they're designed for specific purposes, kits are very effective when it comes to providing just the right amount of hydration to your landscape.

Kits:

• Garden drip watering kits precisely water shrubs, bushes, trees, vines and vegetables.
• Micro-sprinkler kits are ideal for flowerbeds, groundcover, hillsides, large trees and any other densely planted areas.
• Use retrofit kits to convert your existing irrigation system to a drip irrigation system.
• Patio kits efficiently water plants in pots and baskets whether on the ground or hanging.
• Drip soaker kitsare specially designed for irrigating row crops and vegetable gardens.

Features:

• Timers: If you're away on vacation or in the midst of a busy week, use an automatic timer to ensure that your plants, landscaping and garden receive the water they need.
• Stoppers: Sometimes called "goof plugs," stoppers allow you to plug an emitter hole if you need to temporarily pause watering, such as when you rearrange your landscaping or if you relocate the tube to another area.
• Fertilizer injector: If your garden isn't quite growing as well as you'd like, use a fertilizer injector to add nutrients to your drip irrigation line, which will then water and fertilize plants simultaneously to save you time and effort.

Need help identifying a tool or material? Find products fast with image search in The Home Depot Mobile App. Snap a picture of an item you like and we'll show you similar products.

Are you interested in learning more about drip line hose? Contact us today to secure an expert consultation!