4 Advice to Choose a ozone generator manufacturer

08. 04. 2020

WHICH OZONE GENERATOR SHOULD I CHOOSE?

The principle of shock disinfection with ozone is to fill the cleaned area with a sufficient concentration of ozone, which will take care of the effective elimination of all viruses, bacteria, odors and other undesirable substances. This means that the more space you need to clean, the more powerful generator (in milligrams of ozone per hour) you will need.

Manufacturers' tests show that for every 100 m 2 of space, a suitable output is about 10,000 mg of ozone per hour. However, a more powerful generator can do its job faster in the same space than a weaker one.

You will find specific combinations in our table below:

Power is calculated on an area with a standard ceiling height of 2.5 m.

Simply put, the choice depends on the application, if you want to use the ozone generator only in your home environment, the basic type BLACK 3500 will suffice.
For companies, hotels, hospitals and other larger or more loaded spaces, the professional middle path BLUE 7000.
For industrial use, large areas or means of public transport with high pollution/odor, we recommend the WHITE 10000 industrial generator.

Keep in mind that too much ozone can cause strong odor that may remain in the room for several weeks.

USING THE OZONE GENERATOR STEP BY STEP

1. Clear the space of animals, plants and sensitive things

2. Start the generator for the specified time and leave the room

3. After the treatment, allow the ozone to decompose for at least 60 minutes

4. Enter the area and ventilate it well

TIPS FOR EFFECTIVE OZONE CLEANING AND DISINFECTION

Before using the generator, thorough mechanical cleaning of the premises should first take place. Do not use ozone as the only form of cleaning, whether it is disinfecting viruses or getting rid of odors.

For maximum results during disinfection, first mechanically clean surfaces that come into contact with humans with conventional cleaning tools. When cleaning areas from odors, etc., thoroughly vacuum and wipe the floors, remove any deposits and deposits of dust or other dirt. Ozone penetrates from the outside in, so dirt deposits make its process more difficult.

We propose a layered approach that starts with the best cleaning you can provide. If the carpet is a problem, have it cleaned thoroughly. If they are caused by smoke-soaked walls, wash them thoroughly, but do not repaint until the problem is completely eliminated. We recommend repainting the walls only after eliminating the problem by cleaning and using the ozone generator.

Still not sure which product is right for you?

Contact us and our experts will be happy to help you choose and advise how to use the device in your particular case.

2) Ozone Generator Capacity

Unfortunately, determining and labelling the capacity of the ozonation machine is a problematic issue and a bleeding wound in our industry. Since the capacities of ozone generators are not determined, inspected and certificated by any institution, many companies stick the desired capacity label on the products.

There are ozone generators in the UK that claim to produce ozone at a capacity of 10 grams-20 grams or even 50 grams/hour, which are sold especially on e-commerce sites. As consumers and end-users, it is your most natural right to ask the ozone generator manufacturerozone generator manufacturers or sellers how the capacity of the product is determined and how they are tested. The right to obtain information about the product is one of the basic consumer rights and this right is protected by law.

With the gr / nm3 analyzer, each ozone generator is operated for 3 hours at 70-80% humidity and 30 OC values for 5 hours in an uninterrupted air conditioning cabinet and a concentration test is performed.
Under EUOTA / IOA standard directives, the ozone gas measurement device (gr / h) should be tested at 70-80% humidity for 3 hours and 30 OC for 3 hours without interruption.

Each device that complies with the +/- 1% capacity standard in these two measurement factors is sent to the shipment process after the final control approval. Capacity measurement cannot be done with air ozone measuring devices that measure the ozone amount in the environment in PPM. Air ozone measuring devices measure the amount of ozone gas in the volume, the production capacity of the ozone generator cannot be measured with this sensor or measuring devices.

WHICH OZONE GENERATOR SHOULD I CHOOSE?

The principle of shock disinfection with ozone is to fill the cleaned area with a sufficient concentration of ozone, which will take care of the effective elimination of all viruses, bacteria, odors and other undesirable substances. This means that the more space you need to clean, the more powerful generator (in milligrams of ozone per hour) you will need.

Manufacturers' tests show that for every 100 m 2 of space, a suitable output is about 10,000 mg of ozone per hour. However, a more powerful generator can do its job faster in the same space than a weaker one.

You will find specific combinations in our table below:

Power is calculated on an area with a standard ceiling height of 2.5 m.

Simply put, the choice depends on the application, if you want to use the ozone generator only in your home environment, the basic type BLACK 3500 will suffice.
For companies, hotels, hospitals and other larger or more loaded spaces, the professional middle path BLUE 7000.
For industrial use, large areas or means of public transport with high pollution/odor, we recommend the WHITE 10000 industrial generator.

Keep in mind that too much ozone can cause strong odor that may remain in the room for several weeks.

USING THE OZONE GENERATOR STEP BY STEP

1. Clear the space of animals, plants and sensitive things

2. Start the generator for the specified time and leave the room

3. After the treatment, allow the ozone to decompose for at least 60 minutes

4. Enter the area and ventilate it well

If you want to learn more, please visit our website ceramic ozone generator supplier.

TIPS FOR EFFECTIVE OZONE CLEANING AND DISINFECTION

Before using the generator, thorough mechanical cleaning of the premises should first take place. Do not use ozone as the only form of cleaning, whether it is disinfecting viruses or getting rid of odors.

For maximum results during disinfection, first mechanically clean surfaces that come into contact with humans with conventional cleaning tools. When cleaning areas from odors, etc., thoroughly vacuum and wipe the floors, remove any deposits and deposits of dust or other dirt. Ozone penetrates from the outside in, so dirt deposits make its process more difficult.

We propose a layered approach that starts with the best cleaning you can provide. If the carpet is a problem, have it cleaned thoroughly. If they are caused by smoke-soaked walls, wash them thoroughly, but do not repaint until the problem is completely eliminated. We recommend repainting the walls only after eliminating the problem by cleaning and using the ozone generator.

Still not sure which product is right for you?

Contact us and our experts will be happy to help you choose and advise how to use the device in your particular case.

2) Ozone Generator Capacity

Unfortunately, determining and labelling the capacity of the ozonation machine is a problematic issue and a bleeding wound in our industry. Since the capacities of ozone generators are not determined, inspected and certificated by any institution, many companies stick the desired capacity label on the products.

There are ozone generators in the UK that claim to produce ozone at a capacity of 10 grams-20 grams or even 50 grams/hour, which are sold especially on e-commerce sites. As consumers and end-users, it is your most natural right to ask the ozone generator manufacturers or sellers how the capacity of the product is determined and how they are tested. The right to obtain information about the product is one of the basic consumer rights and this right is protected by law.

With the gr / nm3 analyzer, each ozone generator is operated for 3 hours at 70-80% humidity and 30 OC values for 5 hours in an uninterrupted air conditioning cabinet and a concentration test is performed.
Under EUOTA / IOA standard directives, the ozone gas measurement device (gr / h) should be tested at 70-80% humidity for 3 hours and 30 OC for 3 hours without interruption.

Each device that complies with the +/- 1% capacity standard in these two measurement factors is sent to the shipment process after the final control approval. Capacity measurement cannot be done with air ozone measuring devices that measure the ozone amount in the environment in PPM. Air ozone measuring devices measure the amount of ozone gas in the volume, the production capacity of the ozone generator cannot be measured with this sensor or measuring devices.

The company is the world’s best car ozone generator factory supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.