Copper Metal

Contact Companies

Please fill out the following form to submit a Request for Quote to any of the following companies listed on

KLS are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

Get Your Company Listed on this Power Page

Introduction

This article will take an in-depth look at copper.

The article will bring more detail on topics such as:

• What is Copper?
• Production (Extraction) of Copper
• Types of Copper Wire
• Applications of Copper
• And much more&#;

Chapter 1: What is Copper?

Copper is a ductile and malleable reddish-gold metal renowned for its excellent heat and electrical conductivity. It is used to create alloys like brass and bronze when combined with other metals. Due to its tendency to oxidize quickly, copper is classified as a base metal. In the periodic table, copper is denoted with the symbol Cu and has the atomic number 29. The Bronze Age began with the discovery that alloying copper with tin could produce bronze, which was used to make tools and weapons.

Historically, along with silver and gold, copper has been used to mint coins. It is the most commonly used metal for coining due to its lower value compared to silver and gold. Copper is an alloy present in all US coinage and is also used in gun metals.

Copper is available in various forms, including foil, sheet, round bar, wire, and plate, all of which offer high electrical conductivity. Purer grades of copper have even higher conductivity.

Copper has a wide range of applications. It is used in architecture, such as for wall tiles or building facades. DIY enthusiasts often use copper to cover bar tops, enhancing their appearance and durability.

The purest copper grade is 101, with a copper content of 99.99%. The most common grade, 110, is widely used in electrical and architectural applications. Grade 110 contains additional alloying elements that enhance its strength while maintaining its malleability.

Most copper is used in motors and various electrical devices due to its ability to be drawn into wires and its efficient heat and electricity transmission. Additionally, copper is employed in industrial machinery, roofing materials, and plumbing products. Copper sulfate is commonly used as an agricultural pesticide and water-filtration algicide. Copper compounds are also utilized in chemical tests for detecting sugar, such as in Fehling's solution.

Occurrence of Copper

Native copper is commonly sourced from basaltic lavas. Additionally, copper can be extracted from various copper compounds, including sulfides, chlorides, arsenides, and carbonates. Several minerals, such as chalcopyrite, bornite, chalcocite, cuprite, malachite, and azurite, contain copper.

Copper is present in the liver of humans, various marine corals, seaweed ashes, and many arthropods. In blue-blooded crustaceans and mollusks, copper performs a role similar to iron in human hemoglobin, helping to transport oxygen through hemocyanin. Additionally, copper is a trace metal in humans, where it assists in the production of hemoglobin.

Properties of Copper

Copper is a highly ductile metal, though it is not particularly hard or strong on its own. Its strength and hardness can be greatly enhanced through cold working, a process where the metal is worked below its recrystallization temperature, resulting in elongated crystals with a face-centered cubic structure similar to that of harder annealed copper. Common gases such as oxygen, nitrogen, carbon dioxide, and sulfur dioxide, which can affect the mechanical and electrical properties of solidified metals, are insoluble in molten copper. In terms of thermal and electrical conductivity, pure copper ranks just below silver. The majority of natural copper consists of the stable isotopes copper-63 and copper-65.

Copper is insoluble in acids with hydrogen because it is less reactive than hydrogen in the electromotive series. However, it does react with oxidizing acids such as nitric acid and hot, concentrated sulfuric acid. Copper is largely unaffected by seawater and the atmosphere; nevertheless, prolonged exposure to air leads to the formation of a thin, green protective layer known as patina, which consists of hydroxycarbonate, hydroxysulfate, and small amounts of other compounds. In the absence of air, non-oxidizing or non-complexing dilute acids have minimal effect on copper, making it relatively noble.

In the presence of oxygen, copper dissolves readily in sulfuric and nitric acids. It also dissolves in aqueous ammonia or potassium cyanide when oxygen is present, forming highly stable cyano complexes.

The Grades of Copper

Copper grades are categorized into six families: coppers, dilute copper alloys, brass, bronze, copper-nickel alloys, and nickel-silver alloys. These grades are numbered according to the Unified Numbering System (UNS), which was developed by the American National Standards Institute (ANSI) and is managed by the Society of Automotive Engineers (SAE) and the American Society for Testing and Materials (ASTM).

The initial copper grades are pure, containing less than 0.7% impurities, and are designated by UNS numbers C to C. Dilute copper grades have small amounts of alloying elements that alter some properties of pure copper. For example, copper grade C, known for its high electrical conductivity, is used in electrical applications. Copper-nickel alloys, with nickel content ranging from 1.5% to 4.5%, are classified under UNS grades C to C.

Different grades are selected for manufacturing specific products based on their properties. Grades C to C are used to produce items such as coins, evaporators, heat exchanger tubes, automotive hydraulics, and cooling systems. In contrast, UNS grades C to C are used for making ballpoint pens, musical instruments, and transistor casings.

Chapter 2: What is the process of producing (or extracting) copper?

Copper is found across the Earth's surface in mineral deposits or ores mixed with other metals such as zinc and lead. It is primarily extracted through open-pit or underground mining. Of the copper mined, 90% comes from open-pit mining, which involves removing ores from near the surface by digging into the Earth's crust in successive steps.

Copper demand is high in major countries and infrastructure projects. China is the largest consumer, accounting for 52%, followed by Europe at 16%. The leading producers of copper are Chile, Peru, and China, with the United States ranked 5th. Copper is also used in alloys to enhance the malleability of other metals or to impart color.

When the depth of the ore makes open-pit mining impractical, underground mining is employed. This method involves creating shafts in the Earth's surface to allow machinery or explosives to extract the ore.

Once ore is extracted, it must be processed to achieve a high level of purity. Sulfide ores undergo the following five steps:

• The copper minerals are liberated from the ore by crushing it into fine sand.
• The ore is froth floated, which involves mixing the sand with chemicals in order to make the copper particulate water-repellent.
• Air is allowed to pass through the mixture, causing the copper minerals to adhere to bubbles and float to the surface.
• The copper-rich froth is thickened into a concentrate that may be smelted into refined copper concentrate known as anode slabs.
• These slabs are purified using electrolysis to provide 99.99% pure copper (copper cathode slabs).

High concentrations of copper oxide are achieved through a three-step process applied to copper oxide ores:

• First, copper is extracted from the ore using sulfuric acid in a procedure known as heap leaching.
• After that, contaminants are removed during the solvent-extraction stage, which transfers copper from the leach to a solvent.
• Lastly, an electrowinning process (which includes introducing an electric current into the solvent to positively charge copper ions and enable cathode plating) is performed.

Smelting or leaching, followed by electrodeposition from sulfate solutions, are the primary methods used to produce copper for industrial applications. The majority of globally produced copper is consumed by the electrical industry, with the remaining copper being alloyed with other metals.

Copper also plays a critical technical role as an electroplated coating. It is a key component in several important alloys, including brasses, nickel silvers, and bronzes. Copper and nickel can be alloyed to produce various useful alloys, such as Monel®. The aluminum bronzes, which combine copper and aluminum, are also notable. Additionally, beryllium copper is a distinctive alloy because it can be heat-treated to enhance its hardness.

Leading Manufacturers and Suppliers

Chapter 3: What are the different types of copper wire?

Typically, a copper wire serves as a single conductor for electrical communications, whereas a copper cable consists of multiple copper wires bundled together within a single jacket. Despite their variations, all types of copper wire perform the same fundamental function: transmitting electricity with minimal resistance, which helps reduce voltage drops and heat dissipation. Some common types of copper wire include:

Copper-Alloy Wire

Copper alloy wire comes in both standard and specialized forms. Key factors to consider when selecting a product include size, tensile strength (measured in psi), and operating temperature. Alternatives such as brass, bronze, titanium, and zirconium may be considered, each affecting the wire's strength, solderability, durability, and insulation requirements.

When selecting a copper or copper-alloy conductor for a specific electrical application, it is important to weigh the advantages and disadvantages of each type. For applications requiring higher strength or better abrasion and corrosion resistance, copper alloy conductors may be preferable over pure copper. However, while copper alloys offer improved strength and resistance, they generally have lower electrical conductivity compared to pure copper.

Copper is widely used as an electrical conductor in various types of wiring. The telecommunications industry relies on copper wire for power generation, transmission, and message distribution. Additionally, copper is integral to electronic circuits and numerous electrical devices, including phones. Copper and its alloys are also used for electrical contacts. One of the largest markets for copper is in electrical wiring for buildings, where about half of the copper extracted from the earth is used for this purpose.

The effectiveness of a material in transferring electrical charge is determined by its electrical conductivity, which is essential for electrical wiring systems. Copper has an electrical resistivity of 16.78 nΩ&#;m at 68 °F (20 °C), making it the non-precious metal with the highest electrical conductivity.

While pure copper is a single metal, copper alloys are composed of various alloying elements such as nickel, aluminum, silicon, tin, and zinc. These elements are mixed in different proportions to impart specific desirable qualities to the alloys. Common copper alloys include ETP (Electrolytic Tough Pitch) copper and OF (Oxygen-Free) copper.

Electrolytic Tough Pitch (ETP) - C110 Copper

This alloy is the most commonly used copper alloy and exhibits excellent characteristics of ETP copper. It is favored for electrical applications and scenarios requiring low resistance levels because it offers a minimum conductivity of 100% IACS (International Annealed Copper Standard).

Commercially available ETP copper is widely used for making sheets, plates, square bars, strips, and wires. Although not entirely oxygen-free, ETP copper is classified as oxygen-free copper (OFC) because it has a minimum conductivity of 100% IACS. In comparison, OFC typically requires a purity of 99.9%. ETP copper's high conductivity makes it the most popular and widely used copper type. Additionally, ETP copper 110 is valued for its corrosion resistance, workability, and aesthetic qualities, which contribute to its broad range of applications.

Oxygen-Free (OF) - C101 Copper

OF copper, which is 99.99% pure, contains 0.% oxygen. This alloy is less prone to hydrogen embrittlement, has a conductivity of 101% IACS, and is resistant to oxidation.

The highest grade of copper, C101 OF copper, closely resembles elemental copper in its material properties. Due to the extremely high purity required for OF copper, silver impurities are removed.

C101 OF copper is an ultra-high purity product known for its exceptional ductility, excellent electrical and thermal conductivity, and superior machinability. These properties are enhanced compared to standard copper products due to its reduced oxygen concentration of less than 0.%. Consequently, it finds a wide range of highly specialized industrial applications.

The primary difference in processing C101 OF copper compared to pure copper lies in the final refining step. To achieve the low oxygen levels required, this step must be conducted in an oxygen-free environment. This often involves melting copper in a vacuum or a precisely controlled inert atmosphere and then casting the molten copper.

Due to the extensive processing required to achieve such high purity, C101 OF copper is the most expensive grade of copper available.

Beryllium Copper Wire

A non-ferrous alloy called beryllium copper is used in load cells, spring wire, and other items that need to maintain their form under repeated stress and strain. Because of its excellent electrical conductivity, it is utilized in low-current connections for batteries and electrical wiring.

Despite its strength and magnetic inertness, beryllium copper is non-flammable, making it suitable for use in explosive environments such as oil rigs, coal mines, and grain elevators. Beryllium copper tools, including screwdrivers, pliers, wrenches, cold chisels, and hammers, are available for these hazardous settings. While these tools are more expensive and less durable than steel alternatives, their safety features make them preferable for use in dangerous conditions. Aluminum bronze is sometimes used as an alternative for non-sparking equipment.

Beryllium copper wire combines the high strength and non-magnetic, non-sparking properties of copper. It can be either age-hardened or mill-hardened, and is suitable for creating complex structures, intricate shapes, or springs. This wire is flexible and corrosion-resistant, making it ideal for machining, forming, and metalworking applications.

Beryllium copper is known by several names, including copper beryllium, beryllium bronze, Alloy 172, spring copper, and BeCu. These terms are commonly used when referring to this alloy.

The versatility of beryllium copper makes it suitable for a wide range of applications. Its non-sparking, non-magnetic properties, combined with its strength and excellent thermal and electrical conductivity, contribute to its broad use in various fields.

Copper-Clad Aluminum Wire

In copper-clad aluminum (CCA) wire, aluminum serves as the core, while a thin outer layer of oxygen-free copper is applied. This layer is bonded to the aluminum through a continuous, permanent weld during the cladding process. CCA wire is ideal for electrical applications where both conductivity and weight are important. The copper layer, which constitutes 10% to 15% of the wire's cross-sectional area, ensures excellent solderability and maintains AC conductivity equivalent to solid copper at frequencies over 5 MHz. CCA wire is manufactured according to ASTM B-566 specifications and provides effective insulation and shielding for the electric current.

CCA wire comes in various conductor sizes, insulation types, and jacket thicknesses. It is resistant to oil, fire, and ozone, and can operate at extreme temperatures. The copper cladding enhances conductivity while reducing the wire's overall weight. Although CCA wire is less expensive than pure copper wire, it offers greater strength and electrical conductivity compared to pure aluminum wire.

Due to the skin effect, which causes more alternating current to flow through the outer portion of a wire, CCA wires benefit from their copper cladding. This effect is pronounced at high frequencies, making the wire's resistance comparable to that of pure copper because of the superior conductivity of the outer copper layer. Consequently, CCA wire is well-suited for radio frequency applications due to its improved conductivity over bare aluminum wire.

Copper-clad steel wire, which will be discussed further below, utilizes the skin effect similarly to copper-clad aluminum wire. Copper-clad aluminum wires are commonly employed for high-frequency feedlines that require high conductivity and strength.

The characteristics of copper-clad aluminum wire are as follows:

• Superior strength to aluminum
• Usually created as a 10% or 15% by copper volume product
• Cheaper than a wire made of pure copper
• Electrical conductivity greater than that of pure aluminum
• Electrical connections are generally more dependable than with pure aluminum
• Lighter than pure copper

Copper-Clad Steel Wire

Copper-clad steel (CCS) is created by bonding a layer of copper to steel wires, combining the mechanical strength of steel with the corrosion resistance and conductivity of copper. This process produces a wire that efficiently transfers electrical energy, making CCS ideal for power installations, grounding wires, and lines. CCS wires typically offer conductivity ranging from 20% to 40%, depending on the specific requirements of a project. Additionally, the bonding process makes it nearly impossible to remove the copper layer, enhancing theft resistance.

For many electrical applications, including grounding and power installations, metallic cables are essential. These cables must be robust to withstand corrosion and heavy use while maintaining high conductivity. Copper provides excellent conductivity but lacks strength, while steel is strong but less conductive. Copper-clad steel combines the strengths of both metals, offering a solution that balances durability and electrical performance.

The production of copper-clad steel involves a straightforward process: a low-carbon steel wire is first produced for its pliability. Copper is then heated and applied as a coating, forming a strong bond with the steel. This bond is so durable that it is often described as a "marriage" of metals. The resulting CCS wire benefits from the steel's high tensile and mechanical strength, while the copper coating prevents corrosion, extending the wire's lifespan even under heavy use. Most CCS cables use copper with conductivity ranging from 20% to 40%, providing a versatile and durable option for various applications.

Copper-clad steel offers several notable benefits, including enhanced theft deterrence. While copper itself is not traditionally considered a precious metal, it is often targeted by thieves for resale. Copper-clad steel's composite nature makes it less attractive to thieves, as the copper is bonded to steel, making it difficult to separate. The wire's lower intrinsic value and the challenge of removing the copper layer reduce the incentive for theft.

Combining the high tensile strength of steel with the excellent conductivity of copper, copper-clad steel (CCS) wire is used in various applications, such as power supply lines, computer hardware, motors, magnetic assemblies, and advanced pressure and temperature measurement devices. Typically, annealed or soft-tempered copper-clad steel has lower tensile strength compared to its hard-drawn counterparts, but it still provides a robust and effective solution for many industrial needs.

The great tensile strength of steel serves as the core of copper-clad steel wire (CCS), which also has copper's outer layer of conductivity. The inner conductor of coaxial cables or grounding wire is commonly made of low carbon steel as the core material. According to ASTM B-452 specifications, copper-clad steel is produced in two tempers&#;soft and hard drawn&#;with 40% conductivity.

While the steel core in copper-clad steel wire can theoretically be made from any suitable grade for the wire's intended use, specific applications, such as medical ones, may require copper-clad stainless steel (CCSS) with a core from the 300 series for enhanced performance and corrosion resistance.

Besides using "bare" copper-clad steel wire, it can also be electroplated with metals like gold, silver, solder, tin, or nickel to leverage the additional benefits of these materials. Additionally, an insulating layer of enamel can be applied to provide extra heat protection or serve as a barrier against environmental factors.

Titanium-Clad Copper Wire

Titanium-clad copper wire features a thin titanium coating over a copper core. This combination enhances the wire's ductility, making it suitable for shaping and forming, and provides excellent weldability for joining, capping, and connecting applications. It is ideal for use in environments requiring high current-carrying capacity and exceptional corrosion resistance, such as in desalination, water treatment, power production, and chemical processing.

To produce titanium-clad copper, a copper rod is coated with a titanium layer, typically ranging from 1.0 to 1.2 mm in thickness. This composite material can come in various shapes, including round, flat, square, or rectangular, depending on its cross-sectional geometry. The titanium coating provides superior corrosion resistance, while the copper core ensures high electrical conductivity. This makes titanium-clad copper an excellent choice for transporting large currents, maintaining consistent current density, and preventing electrolyte contamination from copper corrosion in mildly corrosive environments. These properties make it a key material in the production of metal anode electrolyzers.

Nickel-Plated Copper Wire

Nickel plating is frequently used on wire goods because it provides the best corrosion protection available. Even at high temperatures, wires coated with nickel remain robust. These cables are frequently utilized in settings with high temperatures because of the copper conductor&#;s exceptional performance owing to the 27% nickel plating.

The 27% nickel-plating on copper wire provides robust protection, withstanding temperatures up to 1,382 °F (750 °C) and offering excellent corrosion resistance at temperatures as low as °F (-60 °C). Nickel is highly resistant to alkalis, reducing agents, and salt sprays, making it a durable choice for various environments.

Nickel-plated copper lead wire cables are also easy to weld, though active flux products are necessary for soldering. Nickel, with its conductivity at 25% of copper's, enhances the performance of the copper core. This coating not only improves conductivity but also extends the wire's lifespan by protecting it from high temperatures and environmental wear.

Chapter 4: What are the applications of copper?

Copper has a wide range of applications, including:

Copper in Infrastructure

Copper is the preferred metal for electricity production, transmission, and distribution due to its cost-effectiveness compared to precious metals. It also plays a crucial role in data transfer within the telecommunications sector, especially concerning internet connectivity and cable wiring. Copper&#;s beneficial properties are integral to the interconnected systems used in commercial operations and power generation and distribution.

In the modern era, copper is central to electricity usage. As technology advances, the demand for copper has surged. When alloyed with other metals, copper exhibits enhanced properties, expanding its range of applications.

Copper is essential across the entire power grid, from generation to consumption. Power stations generate electricity, which is then transmitted through transformers and sent over transmission lines. Substations throughout the network help move the power to its final destination. Copper is a vital component in each step of this process, including in lines, cables, transformers, circuit breakers, and switches.

Copper in Industries

Copper has played a crucial role in the growth of the electrical industry due to its excellent conductivity, mechanical properties, and performance in both ambient and high-temperature environments. Its formability and ease of fabrication have further contributed to its significance. In the past thirty years, rapid advancements in electronic and computer technologies have increased demands for materials that can withstand extreme service conditions.

If you want to learn more, please visit our website copper composite material.

Additional reading:
What is Ferro Silicon and Why Do We Use Them?

To meet the needs of the electronics industry, metals with a tensile strength of 200 ksi ( MPa) are required. Beryllium copper, heat-treated to achieve this strength, is commonly used in heavy industrial applications. Additionally, brazed copper brass alloys are utilized in automobile radiators because of copper's superior thermal conductivity.

Copper and its alloys have become a valuable part of the manufacture of miniaturized intricate parts for handheld devices and multi-ton equipment for heavy industrial applications. Engineering applications include valves, pumps, heat exchangers, aircraft brakes, and sleeve bearings.

While aluminum has traditionally been important in semiconductor production due to its corrosion and rust resistance, recent advancements show that using copper instead of aluminum can enhance semiconductor performance by 30% and reduce its size. With the ability to place up to 200 million transistors on a single chip, copper's impact on semiconductor technology is significant.

Copper in Equipment

Copper is widely utilized in manufacturing various components such as cables, connectors, and switches for electronic devices. It also plays a crucial role in heat exchangers for cooling systems like air conditioners and refrigerators, as well as in microprocessors for smartphones, computers, and other electronics.

Induction motors are favored in automotive production for their high torque density, efficiency, and durability. Traditionally, these motors used low-cost aluminum rotors due to their ease of casting. However, the International Copper Association (ICA) and Copper Development Association (CDA) have developed a stable casting process that allows for the production of copper rotor bars and end rings. This advancement reduces electrical loss and enables the creation of smaller, more efficient induction motors.

Similarly, copper is increasingly replacing aluminum in transformer windings. Copper windings offer practical and efficient benefits, making transformers more compact and portable. With a yield strength of 280 N/mm², copper is stronger, harder, and more ductile than aluminum, making it suitable for heavy-duty transformers. Copper windings are fatigue-resistant, enhance energy performance, and reduce life cycle costs.

These applications highlight just a few of the many uses of copper in the development and production of equipment. Its strength, durability, reliability, and availability make copper a foundational material for both existing technologies and future innovations.

Copper in Transportation

One of the fastest-growing industries globally is the electric car sector, which has its roots in the first industrial revolution. Although this innovative concept was initially explored whimsically, it only gained serious attention with the advent of personal vehicles in the early 20th century.

In the 21st century, the vision of a century ago has materialized into hybrid, plug-in hybrid, and all-electric cars that rely heavily on copper components. Copper is integral to various parts of electric vehicles, including motor windings, braking systems, driving controls, and gearboxes. It also plays a crucial role in automatic temperature controls, seat motors, and hands-free mobile access. A typical car contains over 50 pounds of copper and features approximately one mile of wiring.

Motor oil manufacturers have discovered that adding copper to lubricants helps an engine run smoother and last longer. The introduction of the process is one of the most significant advancements in crankcase chemistry. A wide variety of agricultural and construction equipment rely on copper as part of their structure.

The massive electric shovel, the largest land machine, contains 4,000 tons of copper. The Boeing 747-200 incorporates 2% copper, equivalent to 4.5 tons, and features 632,000 feet of copper wire. A typical diesel-electric locomotive has 5.5 tons of copper, with the latest and most powerful models using up to 8 tons. Diesel-electric railroad locomotives utilize conductor bars for their rotors, six three-phase AC induction motors, and copper wire for windings.

These examples illustrate just a fraction of copper's extensive use in the transportation industry. Copper's excellent conductivity, durability, and strength make it indispensable in various applications. Additionally, copper is often used in the form of bronze or brass for both industrial and consumer products.

Due to its corrosion resistance and ability to repel grime, copper-nickel alloys are commonly used in boats and ships. As reliance on electronics increases, future generations of electric, hybrid, and even traditional vehicles, as well as aircraft and high-speed trains, are expected to require even more copper than their predecessors.

Copper in Construction

Copper is widely used in both residential and commercial buildings. Its corrosion resistance makes it ideal for sprinkler, plumbing, and roofing systems. Additionally, brass doorknobs, composed of copper and zinc, are commonly found in public spaces due to the antibacterial properties of copper and its alloys.

Applications of Oxygen-Free (OF) Copper - C101 OF Copper

Copper products with higher purity levels exhibit superior corrosion resistance, enhanced electrical conductivity, and generate less heat when conducting electricity. C101 oxygen-free copper, being the purest form of copper available, provides the highest level of these benefits.

By removing almost all impurities and oxygen, C101 copper minimizes disruptions in the metallic structure and significantly reduces the oxidation that can impair performance. This results in improved overall quality and efficiency of the copper.

Due to the higher cost of C101 oxygen-free copper, its applications are generally specialized. These include:

• Vacuum Applications: Applications requiring a high vacuum can use C101 OF copper to prevent contamination from copper wire by minimizing the presence of contaminants in a vacuum environment.
• Large Industrial Transformers: C101 OF copper's improved electrical conductivity allows wire inside of transformers to be smaller, using less copper overall and taking up less space in the installation.
• Superior Audio and/or Visual Applications: Copper wiring constructed from C101 OF copper can be used in high-grade audio/visual applications where quality is critical.
• Applications with a Long Lifespan: The C101 OF copper products' extended lifespan might be advantageous in big or extremely difficult-to-replace projects.

Applications of Electrolytic Tough Pitch (ETP) - C110 Copper

C110 copper is commonly used in industrial applications where ductility is important. It is utilized in plumbing, roofing, and electrical systems, as well as in electromagnets, electric motors, and various electronics. Its distinctive color also makes it popular in residential and architectural settings, such as kitchen backsplashes, cutting boards, and cookware.

C110 copper is extensively used in construction-related applications, including wiring, skylight frames, gutters, flashing, and plumbing components. While C110 copper can be welded, the inert gases required for welding are often not recommended due to potential health risks associated with their use.

Applications of Beryllium Copper Wire

Beryllium copper (BeCu) is extensively used in electronic connections, telecommunications equipment, computer components, and small springs. Some of the key benefits of beryllium copper include:

• High ductility, electrical, and thermal conductivity
• The capacity to be stamped with precise tolerances to create complicated forms
• Good resistance to oxidation and corrosion
• Excellent machining, forming, and metalworking capabilities

A single spark can pose significant risks to lives and property in hazardous environments like coal mines and oil rigs. Beryllium copper's non-sparking and non-magnetic properties make it a vital safety feature in such settings. Tools marked with "BeCu," such as wrenches, screwdrivers, and hammers, are made from beryllium copper and are safe for use in these environments.

Beyond its use in non-sparking equipment, beryllium copper is also valued in the creation of high-quality musical instruments. It produces percussion instruments with consistent tone and resonance, making it a popular choice for triangles and tambourines. Additionally, BeCu maintains its strength and thermal conductivity at low temperatures, making it suitable for cryogenic applications.

In valve seats, beryllium copper serves as an alternative to powdered steel or iron, offering superior heat dispersion. These valve seats are commonly used in high-performance, four-stroke engines, often paired with titanium valves.

Applications of Copper-Clad Aluminum

Copper-clad aluminum is widely used in the music industry, including in loudspeakers, subwoofers, guitar cables, amplifiers, noise-cancellation devices, and high-performance audio equipment. Additional applications include:

• Batteries for Hearing Aids: button cells
• Space Propulsion and Sensor Systems: booms, such as a retractable tube for fuel transfer in flight
• Power: Adaptive power supply and wireless chargers
• Coaxial Cable: electromagnetic radiation and atomic research
• Vehicles: modern fuel-injection systems
• Cables and connections for microwaves, including distribution cables and semi-rigid CATV trunks
• Wireless power transmission systems that use inductive coupling through a magnetic field and specialty resistors and capacitors
• Aerospace, military, commercial: underwater sensors, noise cancellation, specialized magnets

Applications of Copper-Clad Steel

Copper-clad steel is primarily utilized in power supply and conversion applications, including wireless, heavy-duty, and specialized power supplies. Other uses include:

• Intelligent pressure and temperature measurement equipment, including flowmeters, differential pressure transmitters, thermometers, and thermocouples
• Agriculture, aircraft, oil & gas, and other heavy-duty applications requiring motors with magnetic components
• Medical applications like atherectomy systems, neuro-interventional devices, and intracardiac ablation catheters
• Grounding wires, torsion springs, special temperature and measuring tools, and for nautical uses
• Wireless power transmission systems that use inductive coupling through a magnetic field and specialty resistors and capacitors

Chapter 5: What are the different forms of copper?

The ductility of copper allows it to be shaped into a wide range of instruments and devices. As a widely available metal, copper continues to be a key component in ongoing innovations. Beyond its role as an electrical conductor, copper is also valuable in various forms, from decorative and artistic pieces to essential wires and coils.

Over the thousands of years that copper has been known, engineers and inventors have consistently sought new and improved uses for it. Each innovation and development has contributed to more efficient and productive advancements in technology.

Copper Coils

Copper coils are thermal and electrical conductive components made from copper wire or tubing, which is bent and wound into a spiral shape. They are crafted from 99.9% pure copper, allowing them to be easily twisted, bent, and shaped.

There are a wide assortment of uses for copper coils from heating and cooling systems to wound coils for induction motors. When copper wire is wound to form a coil, its electricity conducting properties can be transformed into a magnet. Although copper is not magnetic, the addition of electricity to a copper coil changes the movement of electrons in the copper atoms. The magnet properties produced by copper coils are used in motors, dynamos, and transformers.

Copper Tubes

Copper tubes are produced through extrusion, where a heated billet of copper is forced through a die to create a tube shape. Made from 99.9% pure copper, these tubes are easy to form, shape, and configure. Copper tubes are crucial components in air conditioning and refrigerant systems.

The use of copper tubes is due to their ability to form a tight seal that prevents leakage. There are two main types of copper tubes: hard drawn and soft copper. Hard drawn copper tubes are rigid and come in three thicknesses&#;Type K, Type L, and Type M&#;with Type K being the thickest and used for high-pressure applications.

Soft copper tubes are flexible, pliable, and easily bent with an outer diameter (OD) of 0.125 inch up to 1.625 inch (3 mm up to 41 mm). The uses for soft copper tubes include plumbing projects since it is easier to bend and shape. Additionally, soft copper tubes are used for electrical applications.

Copper Bars

Copper bars, including bus bars and ETP bars, offer excellent thermal and electrical conductivity and are used in the construction and plumbing industries. Their popularity stems from their ability to withstand harsh conditions. Copper bars are versatile and can be shaped to fit various applications.

Copper bars serve as raw materials for producing various copper products and are used in manufacturing automobiles and resistance welding electrodes. Different grades of copper are used depending on the application. C110 or C copper bars are especially in demand in the electronics industry.

Alloy C is a highly machinable brass known for its superior strength and corrosion resistance. C brass bars are valued for maintaining strength under demanding conditions and are used in heavy industrial applications.

Copper Sheets and Foil

Copper sheets and foil are produced by roll forming, where a heated copper billet is passed through rollers to create thin sheets. The thickness of these sheets is determined by the number of passes through the rollers. The thickness or gauge of the sheets varies based on their intended applications.

The ductility of copper makes the formation of copper sheets an energy efficient process since less pressure is required to form the sheets. As with other forms of copper, sheeting and foil is produced using a wide range of coppers and copper alloys such as C110, C102, C145, C172, and C100. The gauges of copper sheets run the full gamut of thicknesses from 24 gauge with a thickness of 0. inch (0.54 mm) to 11 gauge at 0.125 inch (3 mm).

Copper Strips

Copper strips are produced similarly to copper sheets and foil, using roll forming to create sheets that are then cut to the desired width and length. Other methods, such as welding and extrusion, are also used to produce copper strips.

Copper strips are made from grades such as C, C, C, C, and C, with gauges ranging from 0.008 inch to 0.040 inch ± 0. inch (0.200 mm to 1.0 mm ± 0. mm) and widths from 0.500 inch to 3.00 inch ± 0.003 inch (12.5 mm to 76.0 mm ± 0.076 mm). They come in various forms, including bare, enameled, braided, and paper copper strips, with bare copper strips being the most commonly used.

Despite their malleability, copper strips maintain tensile strength under pressure. They are typically used as wire due to copper's excellent electrical conductivity.

Copper Fasteners

Copper fasteners are made from various copper alloys, including brass, bronze, and beryllium copper. These alloys are used to create a range of screws and bolts, including hexagonal, countersunk, flat, round, pan, flanged, socket, winged, button head screws, t-slot bolts, and eye bolts.

The lightweight nature of copper fasteners makes them ideal for use in automobiles, engines, ships, and airplanes. They are preferred for applications exposed to corrosive substances and moisture due to their ability to maintain shape and strength under rigorous conditions.

Copper Flange

Copper flanges are rings available in various sizes, shapes, and configurations, including weld neck, slip-on, threaded, blind, socket, and orifice types. The stability, strength, and durability of copper make these flanges an excellent choice for pipe connections. They offer long-lasting performance and the inherent resistant properties of copper.

The variety of copper flanges allows for precise selection to meet the needs of different piping applications. Copper flanges are also weldable, providing secure connections. For applications involving brine water, salt water, and diluted non-oxidized acids, copper-nickel grades C and C are used due to their marine resistance.

Copper Plate

Copper plates, like sheets, bars, and strips, are valued for their thermal and electrical conductivity, strength, formability, and corrosion resistance. They are widely used in the marine industry due to their antifouling properties, which prevent the growth of aquatic organisms.

Before the advent of electronic printing, etched copper plates were crucial in photogravure printing, a technique still used in art creation. Copper plates are also used in roofing, chimneys, and edging. Copper grade C110, one of the most commonly used grades, is frequently used for copper plates.

Copper Rod

Copper rods provide a conductive path for electrical current in cables. They are made by drawing pure copper through dies to achieve the desired rod profile. High-quality, 99.9% pure copper is used for manufacturing copper rods, which are coated with plastic or rubber to protect them and prevent contact with other equipment.

Electrical tough pitch (ETP) copper is the most commonly used for copper rods due to its high electrical conductivity. It is used in power systems, electronic equipment, and medical applications. ETP copper grades C and C offer the necessary strength and stability for producing copper rods. Copper earth rods are used to provide grounding for high-voltage substations, towers, and power distribution systems.

Conclusion

Copper processing is a complicated procedure that requires numerous phases. Copper producers use different refining methods depending on the type of ore, as well as other economic and environmental variables. Currently, sulfide sources account for around 80% of the world's copper output.

Regardless of the kind of ore, mined copper ore must first be concentrated in order to remove copper from gangue (the undesirable elements embedded in an ore). The ore is crushed and ground into powder as the initial stage in this procedure in a ball or rod mill. From there, additional steps are taken to extract the copper from the ore.

More steps are then required to transform the copper into a material suitable for various commercial applications. Various copper alloys have been developed, each suitable for specific purposes. Copper-based products may be found nearly everywhere in our daily lives, from the copper pipes and wires in our homes and offices to the microchips and semiconductors hiding in our smartphones and other electronic devices.

Leading Manufacturers and Suppliers

Guide to Choosing the Best Cookware Material

Cookware Material Guide

Benefits of Copper Cookware

Copper is a beautiful element that creates beautiful, effective cookware. Copper is an excellent conductor of heat, a quality that allows it to cook quickly and more evenly than other types of cookware. Hot spots are virtually non-existent in copper cookware, and you're able to reach specific heat temperatures almost instantly. Copper reacts quickly to changes in temperature, giving the chef greater control over what they're preparing. It's also a lightweight material, which makes preparing any dish simpler.  Restaurant chefs and home cooks alike enjoy using copper pots and pans to cook a variety of items, from delicate sauces to robust roasts.

How to Choose a Copper Pot or Pan

Choosing the copper cookware that's right for you doesn't have to be challenging! When choosing copper cookware, it's important to consider:

Thickness. Pay close attention to the weight of the copper and how thick the copper portion actually is. It's best to look for copper that is at least 2mm thick or thicker. Generally, this thickness performs the best.

Appearance (Hammered vs. Smooth). You can find copper cookware with smooth and hammered finishes. Pots and pans with a smooth finish are more common, but the appearance of the copper pot or pan you choose isn't an indicator of quality. It's simply dependent on your personal preference!

Lining (Tin vs. Stainless). Copper cookware comes in a variety of configurations:  bare, tinned, and stainless steel lined.

• Bare copper is the most inexpensive and an excellent conductor of heat, but overexposure to too much copper can be hazardous to your recipes (and your health).
• Tin lined copper cookware provides you with the excellent heat conduction you expect from copper, but without the risk that comes with exposure to too much copper. The tin coating helps prevent the copper from leeching into your food and ultimately, your gut.
• Stainless steel lined copper cookware is by far the most popular. Because of the interior, you have the freedom to cook with slightly higher temperatures than you could with tin lined products. Stainless steel doesn't rust or tarnish, making it useful in professional kitchens and home settings. This model is easy to clean, too!

Cast Iron vs Copper

When considering buying a copper pot or pan, many people also consider purchasing cast iron. They&#;re two very different types of cookware, each with their own set of pros and cons:

Copper Pros & Cons

Pros of Copper

• Copper cookware distributes heat evenly and quickly, eliminating pesky hot spots. It cooks down quickly, too.
• Copper cookware is great for a variety of dishes, from temperamental dishes like risotto to braising beef.
• Copper cookware lasts a long time when well taken care of.
• Copper is lightweight, making the transfer of these pots and pans simple.
• Copper cookware looks beautiful when it's not in use!
• Copper cookware is easy to clean - simply use dish soap and warm water.

Cons of Copper

• Copper needs to be polished frequently to maintain that appealing shine.
• For copper cookware lined with tin, you'll need it re-tinned every 15-20 years.

Cast Iron Pros & Cons

Pros of Cast Iron

• Heat loves cast iron. Once heated, cast iron maintains heat for a long time.
• You won't find hot spots.
• Excellent for browning, deep frying, and searing.
• Typically, cast iron isn't chemically treated, which means it won't be imparting anything onto the food that you're cooking.
• Cast iron is affordable.

Cons of Cast Iron

• Cast iron can take a long time to heat up.
• They can be extremely heavy, making them difficult to clean.
• Certain foods, particularly acidic items like fruit or tomatoes, can damage cast iron.

Should you use enameled cast iron?

Enamel coated cast iron is much easier to clean than traditional cast iron models. This cookware can be found in a variety of colors, making it especially appealing to homeowners.

Enamel coated cast iron cookware offers a variety of benefits to the chef, the most important being the variety of foods you can cook. Untreated cast iron can react differently to food depending on what you're cooking. Certain dishes may become discolored in a cast iron pan while others may lose some of their flavor. The enamel coating helps prevent these problems. In addition to making cast iron safer to use, an enamel coating can:

• Provide a non-stick surface that makes cooking simpler.
• Give your cast iron a longer life. The coating helps keep the cast iron in tact and last for years to come.
• Allow your cast iron to reach higher temperatures and maintain that heat for longer periods of time.

Why Choose Stainless Steel Cookware?

Stainless steel is an affordable cookware option found in homes and restaurants all over the globe. There are a variety of benefits that stainless steel cookware offers, including:

• Stainless steel pots and pans are heavier, giving them more balance on a cooktop. They also feature sturdier handles, which makes it easier to move heavy foods like roasts.
• Stainless steel cookware holds heat well, making it useful for dishes that have a long cook time.
• You can cook almost anything in a stainless steel pot of pan because of their non-reactive surface.

What is induction cooking?

Induction cooking uses the transfer of magnetic energy to cook food instead of a flame or electric element. This allows for faster cook times and greater temperature control. It's a revolutionary way of cooking that has become increasingly popular in restaurants and home kitchens.

Induction cooking helps conserve energy. Using an induction cooking method, 90% of the energy produced is used to do the cooking. It provides a more powerful, effective cook, which means you can prepare a meal in a fraction of the time. Induction cooking is also extremely safe. The cooking surface never heats, and the dangers present around an open flame or electric heating elements are non-existent. The lack of heat present on the cooking surface also makes it easier to clean, as overflows or spills cannot cook to the surface.

What is induction compatible cookware?

Not all types of cookware can be used on induction cooktops. When you're purchasing cookware, it's important to look for a label that says "induction safe."

Because the induction technology sources power from magnets, the cookware being used must be magnetic. Similarly, it's important that the cookware have a flat bottom. This allows the heat to conduct. Cookware made from aluminum, copper, or glass won't work on an induction surface.

Induction safe cookware must be made of a magnetic material, like cast iron or stainless steel. The Mauviel M'cooks stainless series of pots and pans work on induction cooktops because they are magnetic.

Not sure if your cookware is magnetic? Try sticking a magnet to it! If the magnet sticks, you can use the cookware on an induction cooktop.

Want more information on buy copper clad steel plate? Feel free to contact us.